Loading... Please wait...

Hover over image to zoom

  • Image 1

XP-Turbo Stock Primary Shim Upgrade Kit

$60.00

 Product Description

BACK IN STOCK!!  FREE SHIPPING

 

This is our very own 3P designed product to help prevent the premature failures on the XP-Turbo primary stock clutches, This is a durable replacement shim kit upgrade for the Polaris RZR XP-Turbo primary clutches. This kit will work with your stock sliders and prevent wear on the movable sheave towers which are not repairable.  

I recomend using a PTFE (Teflon) dry lube before installing and as periodic maintenance.

Here is an install video that one of our customers made.  

https://youtu.be/f4jXRDRXoFg?list=FLuj7PhTTsPS3RoJPmoRb5Ug

 

 Find Similar Products by Category

 Product Reviews

Write review

Showing reviews 1-10 of 15 | Next

  1. No Instructions and no video = 1 star rating. 1 Star Review

    Posted by on Jul 6th 2017

    Doesn't seem fair to expect a consumer to just install a part and assume they installed it properly. One sheet of paper with a few pictures on it.

    The video link is broken and relying on a customer to provide instructions is just poor business!


  2. works great 5 Star Review

    Posted by on May 21st 2017

    I am 100% satisfied with my purchase they came very fast and works great


  3. Smooth shim vs rough cast aluminum 5 Star Review

    Posted by on Aug 19th 2016

    Shims provide a smooth durable and replaceable surface providing a superior low friction surface. However if you notice you clutch air intake sucks in dust from your RZR's dust trail. The frog skin is nearly useless against fine dust. Dust will get into the clutch and eat up slides, shims and bearings. I extended the air intake up to the roof and used a high quality air filter. I expect many miles from this set up. I built a small aluminum box that looks like a hood scoop with a large K&N filter inside. Used 3" ABS and fittings and pipe from both intakes to the air scoop and added a bilge blower for added air flow to the clutch. Added a flat piece of course filter foam in the front of the box making an intake area of 12x24 inches.


  4. 3P is a stand up company!! 5 Star Review

    Posted by on Aug 18th 2016

    Ordered shims. Apparently Fedx lost my package. 3P immediatly sent another set of shims!!

    1st class company to work with!!!


  5. 3p shims 5 Star Review

    Posted by on Jul 26th 2016

    Great product and company. Talked with Russ on phone super helpful and knowledgeable the gave me some great ideas. Would purchase from him again.


  6. Great solution for your XPT! 5 Star Review

    Posted by on Jun 9th 2016

    Fast shipping and parts arrived as described. I would much rather replace these as they wear than the primary!


  7. Shim for xp4 1000t 5 Star Review

    Posted by on May 31st 2016

    So far so good. Clutch was hanging up and staying in gear when you hit the brakes. Took 15 min to put these in and back on the road again. Problem seems to be solved at this point.

    Thank you for a great product.


  8. Good concept, easy Install 4 Star Review

    Posted by on May 27th 2016

    I like the product. I was surprised as to the amount of wear on the stock primary with minimal time on the clutch. it is a little soon to tell, but I believe these plates will extend run time significantly. Fairly easy to install as well.


  9. Recommended 4 Star Review

    Posted by on May 19th 2016

    Easy installation. The video link helped as well. Definitely recommend this product if you have an XP Turbo.


  10. Flawless 5 Star Review

    Posted by on May 16th 2016

    Flawless install but do not have any miles on the unit yet. Done as a precaution for the XP Turbo Primary so slides do not lock up and leave you in gear.

    Went in smooth in less than a few minutes. Great product to save you from buying a primary down the road.


Showing reviews 1-10 of 15 | Next

SKU:
3PXPTRK

newsletter

Connect with us

Facebook Instagram

Click the button below to add the XP-Turbo Stock Primary Shim Upgrade Kit to your wish list.